Publicidad
Idiomas disponibles
Idiomas disponibles
is secure. Never hang the machine onto the supply line.
• Separate the machine form any external energy source before changing the
• Avoid direct contact with the machine tool during and after use as it can be hot or
protection, adapted to the work place requirements.
hazards, only use accessories, respectively devices, which are ATEX approved and
specified. Use low-sparking accessories.
SAFETY INSTRUCTIONS FOR PREVENTION OF TRANSPORT HAZARDS
of the machine!
• Never carry the machine at the supply line.
transportation.
protective shoes!
precautions for persons and environment.
• Secure machine against unintentional starting and let the machine cool down to
• Use suitable transport equipment, hoists or lifting accessories for moving heavy
Dust present at the work place could be disturbed during the maintenance procedure
and inhaled. Clean machine and work place before maintenance work.
work!
assembling the machine. Always do maintenance work outside areas which are not
exposed to explosion hazards.
34
ATTENTION – If the machine is fixed to suspension equipment make sure that it
machine tool or an accessory.
sharp. Wear protective gloves!
Defective/ inappropriate gloves can lead to injury. Only wear proper hand
WARNING – Explosion hazard!
When operating pneumatic impact wrenches in areas exposed to explosion
CAUTION – Improper Transport, danger of life due to parts falling down! Damage
ATTENTION – Separate the machine form any external energy source before
Check that the machine is undamaged and in proper condition. Wear worker's
MAINTENANCE AND UPKEEP
WARNING – Maintenance and repair work on pneumatic equipment.
Compressed air can cause severe injury. Observe legal regulations. Take
Additionally, observe the following:
the ambient temperature
assembly groups or parts. Protection against tipping, tumbling or falling down
when assembling/ disassembling the machine/parts.
CAUTION – Skin exposure to hazardous dusts may cause severe dermatitis.
WARNING – Danger of explosion! Generation of sparks during maintenance
Observe local safety regulations. Avoid use of force when disassembling and
Publicidad
