Fermax VEO DUOX Manual De Instalador página 22

DUOX X X X X VEO DUO DUO VEO VEO
DUO DUO VEO VEO
DUOX X X X X VEO DUO DUO VEO VEO
DUO DUO VEO VEO
If Panic Mode is configured in the Guard Unit, Panic Call mode is automatically configured
in the monitors. Upon deactivating this mode in the guard unit, it also deactivates the
monitors.
When you press the F1 button you send a Panic command via the bus. Besides, the F1
terminal acts as an input so that when you connect a button to it, when pressing it you
send a panic command to the guard unit.
Notice: If you want to use a relay ref. 2013 to control a device via the F1 button, you need
an additional 18Vdc power source.
Button Menu: Adjustments and configuration.
· To access the:
- Address programming menu when the monitor is not programmed. From this menu,
you can program the monitor according to your installation needs
- User Menu (once the monitor is programmed). From this menu, you can access the
user's settings to personalise them.
TECHNICAL FEATURES
F1
Operating Temperature
Humidity
OSD screen 4.3" TFT
Resolution
Dimensions
Page 6
Power Supply
Consumption
Standby
Audio + video
18 Vdc
25 mA
230 mA
[-5, +40 °C]
(0% - 90%):
Hor.: 480 Line TV
Ver.: 272 Line TV
200 x 200 x 46 mm
8" x 8" x 1.8"