Tabla de contenido
Publicidad
MULTIPURPOSE BRUSH (2)
This is the ideal tool for the cleaning of hard floors as well as
loose and fitted carpets. Below are some tips on how to clean
these surfaces.
Very dirty floors:
Begin first with the steam cleaning (use the large multipurpose
brush (2) as attachment) to loosen stubborn dirt; then, introduce
a cloth in the tool and lock in position with the appropriate
levers and move the work hose toward and away from the
body to collect the dirt.
Normally dirty floors:
If the floor is not very dirty, apply a cloth to the multipurpose brush (2) and lock with the appropriate
levers, then move the work hose toward and away from the body while simultaneously delivering
steam.
Please Note:
If the steam function is to be used on flooring that requires a cleaning product, such as marble or
PVC, we recommend the use of a terry cloth towel over the floor tool. Adjust the steam volume to
the minimum at the steam control knob (D).
Rugs and Carpeted Floors:
The machine can deeply clean all types of rugs and carpeted floors. To do so, use the large
multipurpose brush (2) first without terry cloth for a deeper cleaning action, then apply the cloth to
collect the dirt.
In the case of encrusted areas or special stains, we recommend treating these first with the steam
nozzle (7). To do so, set the steam level to the maximum at the steam control knob (D).
2
Fig. 17
28
DESCRIPCIÓN DEL GENERADOR DE VAPOR
A Interruptor principal de encendido mandos
B Interruptor de encendido de las resistencias
C Manómetro presión vapor
D Volante regulación vapor
E Testigo verde alcance presión
F Testigo roja de falta de agua
G Bidón de reserva agua
H Bidón detergente
I Tapón de descarga
L Tapa toma accesorios
C
D
F
E
B
A
L
G
H
73
I
Publicidad
Tabla de contenido
