Descargar Imprimir esta página

Control Panel - ratiotec rapidcount T Serie Manual De Instrucciones

Ocultar thumbs Ver también para rapidcount T Serie:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

[EN]

Control Panel

1.
MODE: _____________
Mix: _______________
Sort: _______________
Check: _____________
Count: ______________ Counting of sorted banknotes without counterfeit detection, e.g. foreign cur-
2.
ADD: _______________ Activate or deactivate the function ADD
No: ________________
Yes: ________________ The counting result will be saved. Each further counting procedure is added to
3.
SPEED:_____________
Low: _______________
High: _______________ The device counts approx. 1.000 banknotes/minute.
4.
REPORT: ____________ Counting results and printing
Quick keypress: ______ Show the counting results.
Long keypress: ______
5.
CURR: ______________ Change currency (if available)
6.
BATCH: _____________ The bundle function allows you to count an exact number of banknotes as a
4
1.
2.
3.
4.
Selection of counting modes.
(T 225 | T 275) Counting of unsorted banknotes including value counting and
counterfeit detection.
(T 225 | T 275) Counting of sorted banknotes including value counting and
counterfeit detection. The first banknote counted is used as a reference value.
If there are banknotes from different denomination in the stack, the device
will stop immediately.
(T200) Counting of sorted banknotes including counterfeit detection.
rencies.
Once the counting procedure is completed, the result is deleted as soon as you
remove all the banknotes from the banknote stacker.
the previous counted value. The added value is deleled by pressing the RESET
button.
Selection of the counting speed
The device counts approx. 800 banknotes/minute.
Advice: The more heavily worn the banknotes counted are, the slower the
counting speed should be.
(T 225 | T 275) Print counting result via optionally available Thermal receipt
printer RTP 300.
The currency is shown on the display next to the CURR button, e.g. EURO.
bundle, e.g. bank wrapper.
The function is activated using the BATCH button. After pressing the button,
you can select from a series of predifined values: 100 | 50 | 20 | 10 | 5 | 0
5.
9.
7.
10.
8.

Publicidad

loading

Este manual también es adecuado para:

Rapidcount t 200Rapidcount t 225Rapidcount t 275