Hard Disk Installation - Avtech H.265 NVR Serie Guia De Inicio Rapido

CONNECTION

Hard Disk Installation

Note: It's necessary to install a hard disk first before firmware upgrade to ensure the upgrade process
works properly.
Type 1

Step1: Remove the top cover, and find the hard disk connector and bracket in the device.
Bracket
Screws
Step2: Get a compatible hard disk. With the PCB side facing down, insert the hard disk to one of the hard disk
connector.
Note: To use a green hard disk, use ONLY the hard disk designed especially for surveillance to ensure the
device works properly.
Step3: Fasten the hard disk to the bracket by securing the screws on the bracket.
Note: For the 16CH model which supports five hard disks, please go to "Additional Brackets for Two More
Hard Disks" to know how to install the other two hard disks.
Step4: Replace the top cover and fasten the screws you loosened in Step1.
CR2032
Hard Disk
Connector
Bracket
CR2032
Screws
Secured
042Z
Hard
Disk
1