Chauvet BEAMBAR Guía De Referencia Rápida página 3

EN
What Is
Included
To Begin
Description
Overview
AC Power
Power Linking
Fuse
Replacement
·
BEAMbar™
·
Power Cord
Unpack your BEAMbar™ and make sure you have received all parts in good
condition. If the box or contents appear damaged, notify the carrier immediately,
not CHAUVET®.
The BEAMbar™ is a linear aerial effect light with full pixel control. Having 5
white LEDs, this product produces banks of light with narrow, razor-sharp
beams. Control options include Sound-Active modes, automated programs,
Master/Slave modes and DMX. Two personality choices are available through
4- and 5-channel DMX modes. Dimmer programs and shutter modes offer
additional functionality.
Fuse Holder
Safety Loop
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 21 BEAMbar™ products at 120 VAC and 39 units at
230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
·
·
Power Out
Power In
DMX Out
3
BEAMbar™ QRG
Warranty Card
Quick Reference Guide
Display and
DMX In
Control Buttons
Back Panel View
Microphone