PLATFORM FIT GUIDE • GUIDE D'ADAPTATION • GUÍA DE COMPATIBILIDAD DE LA PLATAFORMA
Platform K
Platform B
GENERAL
• Minimum crossbar spread of 27.5" (700 mm).
• Pivot mount must be secured to at least the second slat from the ends. NOTE:
Follow this guideline when installing a platform that includes 3 pairs of pivot
mount onto a two bar roof rack. The middle pair of pivot mounts will go unused
in this scenario.
• Do not install the platform with the flange of the rail overlapping the pivot mount
as shown at right.
• Center platform when possible.
• Platform can be slid forward on the pivot mount for better hatch clearance.
• For a 3+ crossbar system, evenly space the middle crossbars to ensure balanced
weight distribution.
SPECIFIC APPLICATION GUIDELINES
LOCKNLOAD CROSSBAR CLAMPS
(ROOF RACK)
• Ensure Clamps are as widely
spaced as possible, but INBOARD
of towers.
LOCKNLOAD CROSSBAR CLAMPS (HD TRUCK)
• Ensure LockNLoad Crossbar Clamps are spaced as wide on the
crossbars as possible. Outboard of the towers is preferred.
Instruction #1035998G - Page 4 of 16
Platform J
X
WIDTH
TIMBERLINE TOWERS OR
SKYLINE TOWERS (SIDE RAILS OR
• Set front towers as far forward as
possible.
• Refer to TimberLine or Landing Pad
instructions for adjustment.
Platform E
Platform
Width
K
49"
1245 mm
B
54"
1372 mm
J
65"
Y
1651 mm
E
49"
1245 mm
N
54"
1372 mm
H
62"
1575 mm
ADJUSTABLE TRACK)
Platform N
X
Length
Min. - Max.
55"
26" - 37.25"
1397 mm
660 mm - 946 mm
60"
31.5" - 42.5"
1524 mm
800 mm - 1080 mm
76"
42.5" - 53.5"
1930 mm
1080 mm - 1959 mm
84"
26" - 37.25"
2134 mm
600 mm - 946 mm
84"
31.5" - 42.5"
2134 mm
800 mm - 946 mm
84"
39" - 50.5"
2134 mm
991 mm - 1283 mm
SKYLINE TOWERS (FIXED POINTS)
• Lay a towel on the roof before
installing the pivot mount
assemblies.
CUSTOM APPLICATION
• Refer to platform measurements above
for custom placement.
Platform H
Y
Min. - Max.
27" - 33"
686 mm - 838 mm
27" - 39"
686 mm - 991 mm
28" - 54.5"
711 mm - 1384 mm
35" - 62.5"
889 mm - 1588 mm
35" - 62.5"
889 mm - 1588 mm
35" - 62.5"
889 mm - 1588 mm