Pleasant Hearth 23-153-213 Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
Carefully remove all pieces from carton and
make sure that you have all parts listed (refer
to parts list on page 2-3).
If you are missing parts, please call GHP
customer service at 1-877-447-4768.
1. Lay the Base (C) on a clean, flat surface.
The side with the plastic connectors should
be facing up. Attach the Support Leg onto
base by turning clockwise. Attach the
Trim Panel (E) using two dowels (BB) and
securing the plactic connectors with 3 Bolts
(AA).
2. Slip the Left Inner Panel (J) into the
predrilled holes on Media Shelf (B) as shown
and secure with 2 Bolts (AA). Repeat using
the Right Inner Panel (K).
3. Set Base (C) on floor with the front trim
facing up. Attach the media shelf assembly
to the Base (C) using attached plastic
connectors and 4 Bolts (AA).
1
2
J
3
4
AA
E
N
C
B
K
AA
C
J
B
K
AA
BB