Product Setup - Arion ET-ARHP200BF Manual Del Usuario

4. Product Setup

Using Bluetooth enabled devices
1. Press and hold the
power up. Continue to hold the
another 6 seconds to enter Bluetooth pairing
mode. The LED light will blink blue/red while
in this mode. You will hear a voice prompt
saying "Pairing".
2. On the Bluetooth enabled devices (such as
smartphones) go to SETTINGS > GENERAL >
and enable BLUETOOTH.
3. Select "Search".
4. Select "ARHP200BF". You will hear a voice
prompt saying "Pairing complete".
Charging the Battery
Plug the micro USB cable into the charging port.
It takes about 4 hours to fully charge from an
empty battery. When the battery is full, the
will turn blue.
All manuals and user guides at all-guides.com
button for 3 seconds to
button for
Note: Multipoint technology allows simultaneous connection
to two different devices. Simply repeat the pairing process on
both devices. If you are pairing this headset with other type of
smartphones or tablets, you may need to consult that device's user
manual for specific pairing instructions. This headset automatically
enters STANDBY mode to preserve battery life when not in use,
press any button to wake up. Battery life is also displayed on iOS
devices . You may also check battery life by pressing the button
located on the left headset.