Contents Of Carton; Assembly - Craftsman Bagger PRO Serie Manual Del Operacion

Before installing this accessory, shut the engine off and allow it
to cool. Disconnect the spark plug wire from the spark plug and
remove ignition key on electric start units. Refer to the mower's
Operator's Manual for complete safety instructions. Do not
operate the mower without the entire grass collector in place.
Stop the blades before emptying the grass collector.
NOTE:
Reference to right and left side of the lawn mower and
attachment are observed from the operating position except where
otherwise specified.

Contents of Carton

Before installing this accessory, remove all parts from the carton.
Carton contents are shown in Figure 1, with part numbers are shown
in the table.
4
5
8
NOTE: To purchase replacement parts, call 1-888-331-4569.
Ref. Part Number
1 631-05335B Rear Discharge Door
2 631-05337 Chute Assembly
3 647-05065 Grass bag Frame
4 664-05093 28" Grass bag
5 710-0134 Carriage Bolt, 1/4-20: .62
6 710-05108 Bosscrew: 1/4: .750 (N/S)
7 712-04064 Flange Lock Nut: 1/4-20
8 742-05235 High Lift Blade
9 787-03589 Support Bracket
WARNING
1
6
3
7
2
Figure 1
Description

ASSEMBLY

Attaching the Rear Support Bracket
1. Set the deck to its highest setting. Push down on handle
adjustment lever and pivot handle into storage position. See
Figure 2.
2. Slide grass bagger support bracket (ref. part #9) onto the back
of the mower frame with the bracket side extensions facing
9
backward, and its rear discharge door positioned in the upper
right corner. See Figure 3.
NOTE: Rear discharge door (ref. part #1) comes preassembled
onto support bracket with two bosscrews (ref. part #6).
3. Line the two holes on each side of rear support bracket with
holes in the mower side plates. See Figure 3.
Qty.
1
1
1
1
6
2
6
2
1
8
Figure 2
Figure 3