System Connections - Sherwood RX-4109 Instrucciones De Funcionamiento

System Connections

• Do not plug the AC input cord into the wall AC outlet until all connections are completed.
• Be sure to connect the white RCA pin cords to the L (left) and the red RCA pin cords to the R (right) jacks when
making audio connections.
• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.
• If the electricity fails or the AC input cord is left unplugged for more than several days, the memorized contents
will be cleared. Should this happen, memorized them again.
.
1
CONNECTING ANTENNAs
• Change the position of the FM indoor antenna until you get the best
reception of your favorite FM stations.
• A 75Ω outdoor FM antenna may be used to further improve the
reception. Disconnect the indoor antenna before replacing it with
the outdoor one.
• Place the AM loop antenna as far as possible from the receiver, TV
set, speaker cords and the AC input cord and set it to a direction for
the best reception.
• If the reception is poor with the AM loop antenna, an AM outdoor
antenna can be used in place of the AM loop antenna.
.
2
CONNECTING PHONO
Note
•Do not connect the turntable with MC type cartridge
directly. If so, use a separate head amplifier or step-up
transformer.
5