Technical Specifications - KlipXtreme KPS-10 Serie Guia Del Usuario

III. Assembly instructions
1. Carefully unpack screen from carton box. Remove any protective foam or tape from case
before operation.
2. Grasp the screen handle or pole with one hand and open the three support feet to position
the tripod on the floor.
3. With the other hand, release the lever and position the handle at the level you want the
screen to be fully extended.
4. Next, lock the lever and make sure the assembly is stable.
5. Hold the screen case at right angle to the stand with the wire handle facing up.
6. Extend the telescopic rod to the desired height and fasten the ring.
7. Pull the wire holder and attach the screen surface to the hanger hook.
8. Choose the bar slot that will provide the best angle for your audience.
IV. Packing away
1. Remove the wire handle from the hook and retract the screen slowly into the case.
2. Swivel the case until aligned with the stand.
3. If the telescopic pole is fully extended, release the lever and ring mechanisms to put the pole
back to its fully retracted position.
4. One end of the case can be locked to the top of the tripod for ease of carrying.
V. Technical specifications
MPN KPS-102 KPS-103
Screen dimensions 51.18x67.72x.02in 59.06x78.74x.02in 72.05x96.03x.02in
(HxWxD)
Maximum screen size
86in 100in
(Diagonal)
Viewing area height 48.03in 55.91in
Viewing area width 65.75in 76.77in
Aspect ratio
Weight 16.98lb 19.18lb
Operation type
Mount type
Color
Screen material Outside PVC layers, internal cloth layer
Gain
Viewing angle
Fire retardant
Warranty
KPS-104 KPS-101B KPS-102B KPS-103B
Dimensions
43.31x57.09x.02in 51.18x67.72x.02in 59.06x78.74x.02in
120in 72in 86in 100in
68.90in 40.16in 48.03in 55.91in
94.09in 55.12in 65.75in 76.77in
4:3
22.71lb 12.9lb 16.98lb 19.18lb
Specifications
Manual
Tripod
White
1.1
100°
Yes
Additional information
One year
KPS-104B
72.05x96.03x.02in
120in
68.90in
94.09in
22.71lb