2.13.2
2.13.2
2.13.2
Installing Windows
Installing Windows
Installing Windows
2.13.2
2.13.2
Installing Windows
Installing Windows
RAID Functions
RAID Functions
RAID Functions
RAID Functions
RAID Functions
If you want to install Windows
SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
system.
®
Insert the Windows
drive to boot your system, and follow the instruction to install Windows
Windows
®
Vista
TM
64-bit OS on your system. When you see "Where do you want to
install Windows?" page, please insert the ASRock Support CD into your optical drive,
and click the "Load Driver" button on the left on the bottom to load the NVIDIA
®
drivers. NVIDIA
RAID drivers are in the following path in our Support CD:
.. \ I386 \ Vista (For Windows
.. \ AMD64 \ Vista64 (For Windows
After that, please insert Windows
the optical drive again to continue the installation.
NOTE1.
If you install Windows
want to manage (create, convert, delete, or rebuild) RAID functions on SATA /
SATAII HDDs, you still need to set up "SATA Operation Mode" to [RAID] in BIOS
first. Then, please set the RAID configuration by using the Windows RAID
installation guide in the following path in the Support CD:
.. \ RAID Installation Guide
NOTE2.
Currently, NVIDIA
RAID 5 and RAID 0+1 under Windows
mended to rebuild RAID 5 and RAID 0+1 under RAID ROM. Please press <F10>
when the system boots to enter RAID ROM utility. Please refer to "RAID
Installation Guide" in the Support CD for details of rebuilding RAID. For the
updated NVIDIA
(http://www.asrock.com)
2 2
2 2
2 2
2 2
2 2
ASRock
Vista
Vista
Vista
Vista
Vista
TM
TM
TM
TM
TM
®
®
TM
Vista
or Windows
Advanced screen
®
TM
Vista
/ Windows
TM
®
TM
Vista
/ Windows
Vista
®
Vista
TM
OS)
®
Vista
TM
64-bit OS)
®
TM
Vista
/ Windows
®
TM
Vista
/ Windows
®
RAID driver cannot support Hot Swap function to rebuild
®
RAID driver, please visit our website in the future.
K8NF6P-VSTA
/ Vista
/ Vista
/ Vista
64-bit With
64-bit With
64-bit With
/ Vista
/ Vista
64-bit With
64-bit With
TM
TM
TM
TM
TM
®
TM
Vista
64-bit on your SATA /
IDE Configuration.
®
TM
Vista
64-bit OS on your
64-bit optical disk into the optical
®
®
TM
Vista
64-bit optical disk into
®
TM
Vista
64-bit on IDE HDDs and
®
Vista
TM
/ Vista
TM
64-bit. It is recom-
Motherboard
Vista
TM
/
®
RAID