Step 5 - Arm Bar Assembly; Step 6 - Canopy Attachment - Foundations LX3 Instrucciones De Montaje Y Uso

1.
With Foundations logo on Arm Bar (E) facing up,
®
slide Arm Bar Clamp between fabric armrest cover
and front leg. Slide Arm Bar Clamp Lock Lever
onto front leg tubes above the two Arm Bar Stops
on both sides of the stroller (Fig. 1).
2.
Lock Arm Bar to stroller frame by pulling Arm Bar
Clamp Lock Lever around back of front leg tube,
pull toward front of stroller
2
in on lock lever (Fig. 2).
3.
Repeat step 2 for opposite end of Arm Bar.
4.
Attach passive crotch straps.
- Place free end of passive crotch strap over
top of Arm Bar and secure with snap (Fig. 3).
- Repeat on opposite side (for LX4 & LX6).
1.
Position Canopy (F) with rounded front section
on top and place Canopy in rear seat area and
over top of front seats.
2.
Secure Main Canopy Tube (long tube) by
pushing end of Main Canopy Tube into
Canopy Retainer slot located on outside
of handle near the armrest (Fig. 1).
3.
Secure Rear Canopy Tube (short tube) by
pushing end of canopy tube into Canopy
Retainer slot located on outside of the handle
near the top of the back seat (Fig. 2).
Repeat steps 2 and 3 to secure canopy tubes
on other side of stroller.
7

STEP 5 - Arm Bar Assembly

1
and then press

STEP 6 - Canopy Attachment

Arm Bar
Assembly
Arm Bar
Clamp
Arm Bar
Stops
Arm Bar
Clamp
Lock
Lever
2
1
Passive Crotch
Strap
Main
Canopy
Tube
Armrest
Handle
Rear
Canopy
Tube
Fig. 1
Fig. 2
Fig. 3
Fig. 1
Canopy
Retainer
Fig. 2
Canopy
Retainer