Gardenline 22096-20 Manual Del Usuario página 6

FF
H
H
Fig. 4
CC
E
STEP 3:
Bring two Canopy Supports (E) together so their open ends meet. Insert
four Bolts M6x35mm (CC) through Connector (H), through Canopy
Supports (E), and through a second Connector (H), tighten down using
M6 Nut (5); see Figure 4.
Repeat these steps to assemble the remaining Canopy Supports (E).
10
support@tdcusainc.com
MODEL: 22096-20 PRODUCT CODE: 44964
Assembly Instructions
E
5X
E
CC FF
(20) M6X35 mm Screw (20) M6 Nut
AFTER SALES SUPPORT
1800 599 8898
USA
04/2020
USA
E
Fig. 5
STEP 4:
Slide Cover (K) onto Poles (A
Figure 5. Insert Foot (J) into the bottom of Poles (A
together with two Bolts M6x15mm (BB); see Figure 6. Slide Cover (K)
down over Foot (J).
Repeat these steps for the remaining Poles (A
AFTER SALES SUPPORT
1800 599 8898
USA
MODEL: 22096-20 PRODUCT CODE: 44964
Fig. 6
K
BB
BB
J
& A ) from the bottom of these parts; see
1 2
& A
1
04/2020
USA
Assembly Instructions
A & A
1 2
4X
BB
(8) M6X15 mm Screw
& A ) and screw
1 2
).
2
11
support@tdcusainc.com