jbc AC 2600 ADVANCED Serie Manual De Instrucciones página 4

Sleep temperature.
It allows you to modify temperature in sleep
mode. At higher temperature there is more tip
tinning oxidation and less tip life.
Through experience we've learned that a
difference of approximately 100°C or 200°F
between sleep- and work temperature is ideal.
Temperature adjust.
It is used to make an adjustment in the
temperature of the tool.
Top scale boost.
at the top end of the scale. (Only for analogical
stations till 400ºC or 750ºF).
This function allows us to increase in a maximum
of 50ºC or 100º F the temperature of the tool when
the dial is placed at the top end of the scale.
COUNTERS READ
It controls the control unit counters.
Total hours.
Total of hours that the control unit has been
working.
Sleep cycles.
Number of times that the iron has entered into the
stand.
Sleep hours.
Hours in sleep mode.
Iron changes.
Number of times that a cartridge or handpiece
has been replaced.
Temperature tool increase
RESET PARAMETERS
This function allows to come back to the original
parameters.
JBC reserves the right to make technical changes without
prior notification.
3
ENGLISH