Air Live RS-1200 Quick Setup Guide página 6

STEP 4:
When the New Entry option appears, enter the following configuration:
Source Address – select Inside_Any
Destination Address – select Outside_Any
Service - select ANY
Action - select Permit ALL
Click on OK to apply the changes.
STEP 5:
The configuration is successful when the screen below is displayed. Make
sure that all the computers that are connected to the LAN port have their
Default Gateway IP Address set to the Dual WAN Security Gateway's LAN
IP Address (i.e. 192.168.1.1). At this point, all the computers on the LAN
network should gain access to the Internet immediately. If a Dual WAN
Security Gateway filter function is required, please refer to the Policy
section in the user manual.
Dual WAN Security Gateway
RS-1200
English
5
5