Selecting System Mode - Honeywell Home T6 Pro Z-Wave Guia Del Usuario

Selecting system mode

Current system mode (Heat, Cool, Off, Em Heat*)
is displayed on the thermostat home screen.
The mode that's currently running (Heat On or
Cool On) is displayed in the upper-left corner of
the thermostat home screen.
To cycle through the available modes, touch Mode
on the thermostat home screen and select the
appropriate mode for your desired temperature.
• Heat: Controls the heating system.
• Cool: Controls the cooling system.
• Off: Turns the heating and cooling systems
off.
• Auto: When enabled, the thermostat will
automatically use heating or cooling to reach
the desired temperature.
• Em Heat: Controls auxiliary or emergency
heat; only available on systems with a heat
pump.
Notes:
• Em Heat is only available if the thermostat
is configured to control a heat pump and an
auxiliary/emergency heat stage.
• When Auto mode is selected, Auto Chg. On
will appear in the upper-right corner of the
thermostat home screen, and the active mode
(Heat or Cool) will display under Mode. To set
your temperature preferences in Auto mode,
see page 6.
*Em Heat and Auto modes may not appear on
the thermostat screen depending on your equip-
ment and how your thermostat was installed.
7
AM
Following Schedule
Mode Fan
Heat Auto
Away Home
Mode Menu Fan
AM
Following Schedule
Mode Fan
Auto
Cool
Away Home
Mode Menu Fan
AM
Following Schedule Auto Chg. On
Mode Fan
Auto
Away Home
Mode Menu Fan