4. Operation in autonomous mode
4.3 Personalising the transmitter
Call the transmitter
- The line pick up is immediate for the GSM transmitter.
- Use one of the following 2 methods for the PSTN transmitter.
Method 1,
from another telephone line (mobile or landline)
Ring Ring... Ring
Dial the call number of the
installation.
Method 2 to
be used in the following situations:
- when you call a mobile phone (if it hangs up before the 10th ring),
- when the transmitter cohabits with a telephone answering machine
or a message service.
Ring Ring... Ring
Dial the call number of the installation.
Wait for 2 rings
To prevent the transmitter from accidentally picking up the line during 2 successive calls, you can
deactivate method 2 by entering the following sequence from the main menu: #82 6 1.
Enter #82 6 0 to reactivate it.
To select
French, press 1...
Wait for
10 rings
The transmitter picks up the line after
about 10 rings by default (number of
rings can be changed).
Hang up
Wait for
10 seconds
Dial the call number of the installation again.
The transmitter picks up
after 1 or 2 rings
42
To select
French, press 1...