Transport Position; Operation - Brinly FB-42RY El Manual Del Propietario

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
CAUTION: Keep feet and hands clear of blade while raising and lowering the blade.
Pay close attention to your surrounding and people in your immediate area at all times.
Operation Step 1

Transport Position

1. To raise your blade into transport position, pull the upper handle toward operator.
Note: Ensure the handle has been pulled back far enough to engage the
self-locking feature.
Operation Step 2
Changing the Blade Angle
1. Turn key switch off & engage parking brake, then lower
the blade to the ground.
2. Simply remove the hair pin beneath the push assembly
arm (see fig 2.1) and pull hitch pit out (fig 2.2).
3. Rotate blade to desired location (fig 2.3).
4. Replace the hitch pin and secure hair pin underneath in
order to lock the blade in position.
Fig 2.2
NOTE: Do not adjust angle of blade while in transport position.
1018348-B

OPERATION

Fig 2.1
Fig 2.3
16
pull toward
operator
Fig 1