Intended Use; Assembly And Operation; Before Operation - Work WX152 Manual Original

SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to rain or water
Do not burn
10
Do not dispose of batteries,
Li-I on
Return exhausted batteries to your
local collection or recycling point
Li-Ion
Hammer drilling
Screwdriving
Drilling
Wood
Lithium-Ion Cordless Drill/Driver
Metal
Brick
High speed
Low speed
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.

INTENDED USE

The machine is intended for driving in and
loosening screws as well as for drilling in
wood, metal and plastic.

ASSEMBLY AND OPERATION

Action

BEFORE OPERATION

Removing the battery pack
Charging the battery
Installing the battery pack
ASSEMBLY
CHUCK ADJUSTMENT
WARNING: Always lock off trigger
switch and disconnect tool from power
source when changing accessories. Always
ensure the bit is secure before starting the tool.
Damage to the Chuck or a loose bit may cause
possible personal injury.
--Removing the bits
--Inserting the bits
Figure
See Fig. A1
See Fig. A2
See Fig. A3
See Fig. B2
See Fig. B1
EN