Product Usage - SATA 51305 Manual Del Uso

Names and contents of toxic and hazardous substances or elements in products:
Pb
X
o: The content of the toxic and hazardous substances in all the homogeneous materials of the component is below the limit
x: Indicates that the content of toxic and hazardous substances in at least one homogeneous material of the component exceeds

Product usage:

This product is designed for drilling wood, metal and plastic and other similar materials under general conditions.
Instructions for use:
Note:
Before assembling, make sure that turn off the tool and the tool plugs are removed
install or disassemble the drill bit Installation:
use the anticlockwise way to lossen the drill chuck and insert the drill into it. It can be used after clockwise tightening.
Disassembly: when removing the drill, please loosen the chuck in counterclockwise direction.
start / shutdown:
warning:
Please let the tool work at a free speed. Do not overload
Press the start button, the tool can be started. Relax button, tool stop rotation. When continuous rotation is needed, press the button and
press the lock button. Then press the button, then relax, and the machine stops turning.
speed control of switch:
Adjust the speed without pole type. The different force on the switch so that change spend of the switch. The range of change is
between zero and maximum speed. Small force, low speed. It is easy to control and slow down. After a stable and reliable start, fully
press the switch for faster speed.
change the direction of rotation:
Use positive / reverse buttons to change machine steering. Positive rotation: for drilling and tightening screws, turn push the positive
and reverse switch to the left. Push it to the end. Reversal: apply to relax or turn out the screws, turn the positive switch to the right.
Push it to the end.
Drilling operation:
Wood drills can be obtained well by using wood drills with leading screws. This lead screw can make the drill more easily drilled.
51305/05158/05159
Harmful Substance
Hg Cd
o o
requirements specified in the SJ/T11363-2006 standard
the limit specified in the SJ/T11363- 2006 standard
中文
EN DE
Cr（VI） PBB
o o
RU KO PT JA ES
PBD
o
13