Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE & TROUBLESHOOTING
Caution:
Before maintenance or cleaning is carried out, the range
the main power supply. Ensure that the range
plug removed.
1.Spills and splashes will not harden and stick to the glass, as it hardly heats up.
2.
Micro crystal board surrounding should maintain clean, if have leakage to it as soon as possible
please clean.
3.Slight stains can be removed with kitchen paper or cloth.
4.More resistant stains will need specific product for vitro-ceramic glass. Follow each product's
inductions.
Important:
1.
Do not use abrasive products or cleaning powders as these could scratch the hob.
2.Do not use a steam cleaner.
3.If any cracks should appear on the surface of the glass, unplug he appliance immediately.
4.Do not use any part of the hob until a new vitro-ceramic glass has been installed.
Problem
Switch on the power, knobs or buttons
transferred to work a state, hot dish
doesn't work.
Use process stopped suddenly
heating
A few small fault can follow the above table gate, contrasting checking whether the problems can
be solved quickly.
if contrasting checking fault diagnosis and treatment table, oven still can not run normally, please
contact manufacturer authorized after-sales service.
Please don't themselves freely remove repair, lest produce risk or to machine damage.
machine
machine
is switched off at the wall socket and the
Check and eliminate
1.The power cord is connecte.
2.Switches, sockets, fuse, the power is in good
condition.
Heating plate safety protection, wait a few minutes
again electrify use.
10
should be disconnected from
Publicidad
