Flexible Area
• This area can be used as a single zone or as two different zones, accordingly to the
cooking needs anytime.
• Flexible area is made of two independent inductors that can be controlled
separately. When working as a single zone, a cookware is moved from one zone
to the other one within the flexible area keeping the same power level of the zone
where the cookware originally was placed, and the part that is not covered by
cookware is automatically switched off.
Examples of good pot placement and bad pot placement:
Note: Make sure to place the cookwares centered on the single cooking zone. In
case of oval, rectangular and elongated pans make sure to place the pans centered
on the cooking zone covering both cross .Make sure the cookwares to cover more
than 3/4 area of heating zone. Putting a round pot in the middle region is not
recommended.
EN
63