Technical Data; Declaration Of Conformity - Lavor EG-M 3800 Manual De Instrucciones

Ocultar thumbs Ver también para EG-M 3800:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
@
The pump must not be opened by
the user.
Bleeding the pump housing (fig. A)
After each use the pump housing must be
drained.
Remove the water hoses present.
n
Remove the screw from the bleeding point (7).
n
Tilt the machine forward and empty the pump
n
housing.
Re­insert the screw and tighten it securely.
n
@
Never fully close the bleeding point
if you leave the machine in an area
colder than 0 °C.

TECHNICAL DATA

Mains voltage
Mains frequency
Power input
Max. pump capacity
Max. pumping depth
Max. pumping height
Max. water temperature
Weight
Level of sound pressure measured according to
ISO 3744:
L
(sound pressure)
pA
GUARANTEE
This product has been thoroughly checked in
the factory. After purchase date a full 2 year's
guarantee applies to material and production
defects. A guarantee of 6 months applies to
rechargeable batteries/battery packs and chargers.
Guarantee conditions
If the product shows defects as a result of
material and production defects during the
period of guarantee, we guarantee free repair
on condition that:
­ the product has been used properly and for
­ repairs are professionally carried out by
­ the proof of purchase will be submitted.
Accessories and parts showing normal wear are
not covered by any guarantee.
If, during the period of guarantee, a defect
emerges that cannot be repaired, free
replacement of the product takes place.
[
ENVIRONMENT
Should your product need replacement after
extended use, do not put it in the domestic waste
but dispose of it in an environmentally safe way.
EG-M 3800
V 230
Hz 50
W 1.200
l/h 3,600
m 8
m 44
°C 35
kg 6.3
EG-M 3800
dB(A) < 70
the purpose for which it has been intended.
a person appointed by the supplier.

DECLARATION Of CONfORMITY

%
Lavorwash S.p.A. declares that the machines:
Water pump EG-M 3800
have been designed in compliance with the
following standards:
EN 50366, EN 55014­1, EN 55014­2,
EN 60335­1, EN 60335­2­41, EN 61000­3­2,
EN 61000­3­3
and in accordance with the following directives:
2004/108/EC, 2006/95/EC
Pegognaga, 02­2010
Lavorwash S.p.A., via J. F. Kennedy, 12 Italy 46020 Pegognaga (MN)
GB
Giancarlo Lanfredi
Director
35

Publicidad

Tabla de contenido
loading

Tabla de contenido