Specific Safety Rules; Product Specifications - gopart ATV Manual Del Usuario

SPECIFIC SAFETY RULES

1 Always wear protective clothing, eyewear, and dust mask to prevent contact with
chemical and other materials being applied with this machine.
2 Remove any material in hopper before lifting or detaching this machine from the
vehicle.
3 Care must be taken when lifting this machine so as not to cause personal injury
or equipment damage. Never attempt to install this machine to the vehicle alone.
Recruit the help of someone to assist when attaching and detaching this machine
from the vehicle.
4 Refer to the material packaging or the Material Safety Data Sheet for precaution-
ary measures required when handling materials to be applied.
5 Before attaching this machine, consideration must be given to the load capacity of
the vehicle. Refer to the owner's manual of the vehicle for rated load capacity. Be
sure to take into account the weight of this machine 20lbs and the weight of the
material to be placed in the hopper when calculating the total load.
6 Keep hangs away from any spinning object.
HOW TO OPERATE SAFETY
1 Read, understand, and follow all product label information provided on the mate-
rial being applied.
2 An adjustable solid stop is provided that allows the operator to adjust to the de-
sired opening position on the rate setting control prior to operation of the vehicle.
This allows repeatability to the stop without the need to look at the control while
operation the vehicle.
3 Establish the correct rate and then lock the stop in that position using the thumb
wing nut on the setting control.

PRODUCT SPECIFICATIONS

1 12 Volt motor with vinyl coating mounts to front or rear luggage rack, lever and
gauge mounts to either side.
2 Fits most brands of ATVs and comes with wiring harness for easy installation.
3 Heavy 80-Lb <36kg> load bearing capacity.
4 Capacity:1900 cu.in.
UK
3