gopart ATV Manual Del Usuario página 4

UNPACKING
INSTRUCTIONS
When unpacking the tools:
1 Carefully remove the tool and accessories from the box.
2 Make sure that all items listed in the packing list are included.
3 Inspect the tool carefully to make sure no breakage or damage occurred during
UK
shipping.
4 Do not discard the packing material until you have carefully inspected and satis-
factorily operated the tool.
WARNING: If any parts are missing do not operate the tool until the missing parts are replaced. Failure to do so
could result in possible serious personal injury.
ASSEMBLY
1 Attach frames to hopper as shown
using M5x35 Wood Screws (#14).
2 Connect the rate control assem-
bly to, the frame using the Round
Head Screw M6x45 (#19) and Wing
Nut M6 (#24).
3 Position the rate control assembly
to either frame rail based on if the
spreader is mounted to the front
or the rear rack. If mounted on
front rack the control should be
positioned to the left rail, if mounted on the rear rack the control should be posi-
tioned on the right rail.
4