RuarkAudio BackPack II Guia Del Usuario página 4

Using your BackPack II with
an R1 mk3 radio
To turn the R1 mk3 radio on,
press and hold the standby key
for a few seconds until the logo
appears on the display. To turn
the radio off, press the standby
key as normal but please note
that to conserve battery life your
radio will switch off completely
instead of going into standby.
If you are going to leave your
R1 mk3 off for extended periods
of time with the BackPack II
fitted but not plugged into the
mains, we recommend you switch
the power button (7) to OFF.
EN-4
Using with an R1 mk2 radio
or MR1 Bluetooth speakers
When your BackPack II is ON
your R1 mk2 or MR1 will behave
as if powered by mains adapter
so simply press the standby
key or knob to turn your radio
or speakers on or to standby.
Please note that leaving your
R1 mk2 or MR1 in standby
when running solely from the
BackPack II will drain the
batteries. To get the maximum
battery life from your BackPack II,
ensure it is switched OFF when
not using your radio or speakers.