THE BOLD LOOK OF KOHLER K-922 Guia De Instalacion página 6

2x4's
5-5/8"
(14.3 cm)
2"
(5.1 cm)
Bathing
Fixture
3. Install the Drip Tray Mounting Plate
NOTE: The drip tray is an optional accessory available for wall
mount but not for ceiling mount.
NOTE: Install the 2x4's so the drip tray is level or has a slight
forward slope to ensure proper drainage.
Attach a 2x4 flush to the back of the wall stud to support the
lower lip of the drip tray mounting plate. Position the 2x4 so it
will be 2" (5.1 cm) above the top of the bathing fixture.
Attach a second 2x4 so it is 5-5/8" (14.3 cm) above the first 2x4.
NOTE: When 2x6 wall studs are present, install the 2x4's so they are
supported 2" (5.1 cm) from the back of the wall stud.
Attach the drip tray mounting plate to the 2x4's using six drywall
or #10x1" screws. Make sure the mounting plate is centered under
the spout's location.
1006741-2-G
Backup
Plate
Mounting
Plate
Drywall or
#10 Wood
Screws
6
Install nut
and
washer.
Stud
Kohler Co.