The Audio Jack Cable; Using The Headset; The Microphone - Silvercrest SKM 40 C1 Manual De Instrucciones E Indicaciones De Seguridad

SilverCrest SKM 40 C1

7.2 The audio jack cable

The two 3.5mm jack
plugs of the supplied
audio connection
cable differ slightly
from each other.
Take care that the cable is connected properly to ensure the correct functioning
of the built-in microphone (5) in the audio jack cable (B). Also refer to the
"Using the headset" section.

7.3 Using the headset

WARNING! To avoid hearing damage, you must set the volume
of your audio source to the lowest level before connecting the
headset. You can then adjust the volume to the desired level.
Insert the jack plug (4) of the audio jack cable (B) into one of the jack sockets
(6) on the headset earpieces (3). To ensure the correct functioning of the
microphone (5), the jack plug (4) with the two rings and the headphone
symbol must be inserted into the jack socket (6) of the headset (A).

7.4 The microphone

You can communicate easily via the built-in microphone (5) in the audio jack
cable (B) if you are using the headset (A) normally or as a hands-free kit.
28 - English
Headset connection (2 rings)
1.
Audio source connection (3 rings)
2.