SATA 05801 Manual Del Uso página 14

General safety warnings for electric tools - precautions for electric tool operation
- Do not abuse electric tools but use it properly according to the application. The electrical tool designed properly will make your work
more efficient and safer.
- If the switch cannot power on or power off the tool power, such electric tool cannot be used. Electric tool that cannot be controlled with
switch is dangerous. If so, the electric tool must be repaired.
- Unplug from the power supply and/or disconnect the battery box from the tools before any link implementation, accessory replacement
or electric tool storage. Such protective measures can reduce the risks of sudden starting of tools.
- Keep the unused electric tools beyond the reach of children and do not make the personnel unfamiliar with electric tools or the
instructions operate them. It is dangerous for the users to use the electric tools without training.
- Maintain electric tools, and check whether the moving parts are adjusted in place or stuck, as well as the damage of parts and other
conditions affecting the operation of electric tools. For any damage, electric tools shall be repaired before use. Many accidents result
from the electric tools with poor maintenance.
- Maintain the cutters sharp and clean. The well maintained cutters with sharp cutting edge are not easily blocked and can be easily
controlled.
- Use electric tools, accessories, tool bits, etc. according to the operation instructions, operation conditions and operations. Risks may be
caused if electric tool is used in the operations which are not in compliance with the purposes.
General safety warnings for electric tools - precautions for battery tool operation
- Use only the charger specified by the manufacturer for charging. The fire will occur when the charger suitable for one type of battery box
is used for other types.
- Electric tools can only be used when being equipped with special battery box. The use of other battery boxes will cause damage and fire.
- When battery box is not used, it should be kept far away from other metal objects, such as clip, coin, key, nail, bolt or other small metal
articles, so as to avoid connecting one end with the other. The short circuit at the end of battery will cause combustion or fire.
- In case of abuse, liquid will splash from the battery, which cannot be contacted. In case of contact with the liquid by accident, wash it with
water immediately. If the liquid contacts eyes, medical aid is required. The liquid splashed from battery will be in corrosion or burning.
General safety warnings for electric tools - maintenance
- The professional maintenance personnel use the same spare parts to maintain the electric tools, so as to ensure the safety of the
electric tools being maintained.
14
05801/05802
中文
EN DE RU KO PT JA ES