SATA AE1015 Manual De Instrucciones página 56

Installation, commissioning and operation of auxiliary arm:
Fig. 7-1
Open the packaging box and unpack the small wooden box. As
shown in Fig. 7-1.
Fig. 7-3
Tighten the screws of central positioning collar with 6# internal
hexagon wrench as shown in Fig. 7-3.
Fig7-5
Install the main body of auxiliary arm (with the cylinder block
upwards) onto the revolving shaft on the column as shown in Fig. 7-5
56
AE1015/AE1015-3/AE1015H/AE1015H-3
中文
EN
Fig. 7-2
Place the fixed seat on the column and fasten it with bolts as
shown in Fig. 7-2.
Fig. 7-4
Remove the fixing screws of auxiliary arm with 10# internal
hexagon wrench as shown in Fig. 7-4.
Fig. 7-6
Slightly swing the main body of auxiliary arm until the main body of
auxiliary arm descends to the lowest end as shown in Fig. 7-6.
DE RU KO PT JA ES