RIDGID K-39 Instrucciones De Uso página 3

K-39, K-39B, K-40
Description, Specifi cations and
Standard Equipment
Description
The RIDGID model K-39 AF, K-39 AF Battery and K-40 are hand-held drain
cleaners designed to clean 3/4" to 21/2" drain lines in kitchens, bathrooms
and utility rooms.
The K-39 electric powered tool is a double-insulated design equipped with
polarized plug. Double insulation eliminates the need for the three-wire
grounded power cord and grounded supply system.
The slide-action chuck grips the cable so that it can be forced into the blockage
as the drum continues to spin.
The autofeed unit automatically feeds and retrieves the cable thereby
eliminating the need for manual control.
The Model K-39B (Figure 2) battery powered version eliminates the need for a
power outlet or extension cord at the point of application. It is offered with the
slide-action chuck and the autofeed assembly.
Figure 2 – K-39B Drain Cleaner
The RIDGID K-40 drain cleaner (Figure 3) is designed to clean 30-75mm lines.
The K-40 is equiped with a guide hose and double action autofeed for easy
access to confi ned spaces.
Figure 3 –K-40 Drain Cleaner
2
K-39, K-40 specifi cations, standard
equipment and accessories: see
catalog
Drain Cleaner Inspection
WARNING: To prevent serious injury, inspect your Drain Cleaning Machine.
The following inspection procedures should be performed before each use.
1. Make sure the Drain Cleaning Machine is unplugged.
2. Electrical components:
K-39 / K-40 Drain Cleaner:
Inspect the power cord and plug for damage. If the plug has been
modifi ed or if the cord is damaged, do not use the Drain Cleaner until
the cord has been replaced.
K-39 Battery Charger:
Inspect the power cord and plug for damage. If the cord or plug is dam-
aged, do not use the charger until the cord is replaced. Inspect charger
for damage. Do not use charger if it has received a sharp blow, been
dropped or otherwise damaged.
3. Inspect the Drain Cleaning Machine for any broken, missing, misaligned
or binding parts as well as any other conditions which may affect the
safe and normal operation of the machine. If any of these conditions are
present, do not use the Drain Cleaning Machine until any problem has
been repaired.
4. Lubricate the Drain Cleaner and the autofeed unit, if necessary, accor-
ding to the Maintenance Instructions.
5. Use accessories that are designed for your drain cleaner and meet
the needs of your application. The correct accessories allow you to do
the job successfully and safely. Accessories suitable for use with other
equipment may be hazardous when used with this drain cleaner.
6. Clean any oil, grease or dirt from all equipment handles and controls.
This reduces the risk of injury due to a tool or control slipping from your
grip.
7. Inspect cables and couplings for wear and damage. Cables should be
replaced when they become severely worn or corroded. A worn cable can
be identifi ed when the outside coils become fl at or having several kinks
throughout the cable.
WARNING: Worn or damaged cables can break causing serious injury.
Ridge Tool Company