SATA AE1017H Instrucciones De Uso página 45

4.2.6
4.2.7
4.2.8
AE1017H
中文
EN
First remove the fixing screws from the
ejector cylinder (Fig. 4-2) and set them
aside.
Fig. 4-2
Install the column on the upper seat of the
cabinet, align the column spindle hole with
the mounting hole of the upper seat of the
cabinet and insert the spindle (Fig. 4-3),
then screw the washer and bolt according
to the tightening torque of 70 Nm.
Fig. 4-3
Place the ф12 hole at the lower front of
the column at the round hole of the upper
seat (Fig. 4-4), then load the hexagonal bolt
and tighten it with a nut (Fig. 4-5).
Fig. 4-4
DE RU KO PT JA ES
45