Brandson Equipment 303452 Manual Del Usuario página 43

Charging level indication Approximate charging level
The table below shows the charging level indication and its meaning.
7. Saw blades
Saw blade selection
The correct selection of the appropriate sawblade is crucial for the per-
formance of the device. Select the appropriate sawblade depending on
the material to be cut. A correctly chosen sawblade makes it easier and
faster to cut and increases the life of the sawblade. Saw blades with fewer
teeth, for example 10 teeth per inch (TPI) are typically used for cutting
wood, while saw blades with more teeth are suitable for cutting metal or
plastic. We recommend 14 TPI for plastics and soft metals and 18 TPI for
hard metals. The reciprocating saw is suitable for the following purposes:
• Cutting all types of wood, including lumber, plywood, panels, composi-
tion boards and hardwood.
• Cutting drywalls
• Cutting plastic
• Cutting metals such as steel sheets, pipe, steel rods, aluminium, brass
and copper
Note: Accessories such as saw blades and lubricating oils can be pur-
chased separately from special markets.
English
0-10%
10-25%
25-50%
50-75%
75-100%
43