FAUCET INSTALLATION
7
7E
7D
7D
7 VALVE FLANGE INSTALLATION
Place Plastic Base (7A) and Flange (7B) over Valve Body (7C) covering the Valve Body
Washers (7D). Secure by threading the Plastic Nut (7E) onto the Valve Body (7C).
8
8C
8A
7E
8B
8 HANDLE INSTALLATION
Before proceeding, Valve Stems (8B) are to be set in the closed position.
Screw Stem Extender (8A) onto the Valve Stem (8B). Attach Handle Hubs (8C) onto
Valve Stems (8B) and tighten Set Screws (8D). Make sure Set Screw (8D) is securely
tightened to handle (8C). Place Button (9E).
9
9 SPOUT INSTALLATION
Place Lower Base (9E) over Anchor (9B). Assemble and align Quick Connect Spout
(9A) onto Anchor (9B) and tighten Set Screw (9C). Place Button (9D).
7B
7E
7A
7C
7B
7Z
7C
8D
8D
8C
7E
8A
8B
9A
9D
9C
9E
9B
ENGLISH
10
"
10 AIR GAP
Air Gap for this spout is as shown. Please consult your local building code for Air Gap
restrictions.
11 UNIT START UP
Turn on hot and cold water supply valves, fl ush Fitting until water is clear and clean.
Caution: Check all connections for leaks. Failure to do so can result in
water damage.
MAINTENANCE & CARE
CAUTION: Maintenance
DISASSEMBLY
1.
Replacement parts may be available at the store where you purchased
your faucet.
2.
When replacement parts are not available, please write or call Price
Pfi ster Consumer Service.
3.
Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative fi nishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepfi ster.com
• Installation Support
• Care and Warranty Information
3