Inserting The Switch - Abicor Binzel CAT3 PRO Manual De Instrucciones

Switch Replacement for CAT3 PRO

1.2 Inserting the switch

BEI.0369.0 • 2021-02-16
1 Replacing the switch
1 Ensure that the new switch protrudes over
the adjusting nut by approx. 0.7 mm.
2 Insert the new switch with flange plug in
CAT3 PRO until the switch locks in place.
3 Position the retaining sheet in place.
4 Pre-mount the retaining sheet with
the cylinder head screws (M3 × 6)
(SW 2.5, tightening torque 0.3 Nm).
EN - 5