For Your Safety; Electrical Safety Notes; Undercarriage Safety Notes - Fein GIBE5V6 Manual De Instrucciones

GIB_GIBE (US).book Seite 3 Mittwoch, 18. März 2009 9:50 09
GIB/GIBE

1. For your safety.

Read all safety warnings and all
WARNING
instructions. Failure to follow
the warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for future refe-
rence.
Do not use this machine before you have
thoroughly read and completely under-
stood this Instruction Manual, including the fig-
ures, specifications, safety regulations and the
signs indicating DANGER, WARNING and
CAUTION.
Only carry out such operations with this
machine as intended for by FEIN. Only use appli-
cation tools and accessories that have been
released by FEIN.
Please also observe the relevant national indus-
trial safety regulations.
Non-observance of the safety instructions in the
said documentation can lead to an electric shock,
burns and/or severe injuries.
This Instruction Manual should be kept for later
use and enclosed with the machine, should it be
passed on or sold.
SAVE THESE INSTRUCTIONS.

1.1 Electrical Safety Notes.

Pull out the mains plug for main-
WARNING
tenance and repair! Switching
the machine on unintentionally can lead to seri-
ous injuries. Avoid accidental starting by making
sure the switch is in the off-position before plug-
ging in or wiring up the machine.
The mains plug of the machine
WARNING
may be mounted only by a quali-
fied electrician. The protective conductor in the
mains socket outlet must be connected with the
protective earthing of the mains supply.
Check the rotation direction of the motor before
starting the operation of the machine for the first
time. If the rotation direction of the motor is
incorrect, the workpiece can be thrown from
the machine and cause an accident. The rotation
direction may be changed only by a qualified
electrician.
When wiring this machine make sure it is prop-
erly grounded in accordance with National Elec-
tric code and local codes and ordinances. This
work should be done by a qualified electrician.
The mains plug of the extraction system may be
mounted only by a qualified electrician. The pro-
tective conductor in the mains socket outlet
must be connected with the protective earthing
of the mains supply.
Have the electrical safety of the extraction system
checked regularly in accordance with statutory
regulations. For systems that have not been
checked, there may be danger of electrical
shock!

1.2 Undercarriage Safety Notes.

Make sure that the undercarriage stands securely
and has a level setup position. Fasten the under-
carriage to the ground. If the undercarriage tips
over during operation, serious injuries can
result.
Use appropriate fastening material when mount-
ing the machine to the undercarriage. When
mounted incorrectly, the machine can come
loose from the undercarriage and cause serious
accidents.
Before switching on, ensure that all clamping
levers on the undercarriage are firmly tightened.
Sudden lowering of the machine during the
work procedure can lead to serious injuries.
en
3