Home Decorators Collection SKU 1002099626 Manual De Instrucciones página 5

TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION (Not included):
Light Bulb
SKU 1002099626 60 Watt maximum
Flathead screwdriver
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
2 screw (#1)
ASSEMBLY INSTRUCTIONS:
1. Shut off power at the fuse box or circuit breaker box, if necessary remove old fixture and all
mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area, take care not to lose
any small parts necessary for installation.
3. Install light bulbs in accordance with the fixtures specifications. (DO NOT EXCEED THE
MAXIMUM WATTAGE RATING!!)
4. Glass shade is pre-assembled, if doing glass replacement, unscrew Screws (#1), separate
Fixture frame (#7) from cover (#2) and take off broken glass shade, then put the Glass Shade
(#6) into the Fixture frame (#7). Finally screw the Screws (#1) back to secure the fixture frame
with the cover.
ASSEMBLY:
Safety goggles
Phillips screwdriver
2 Cap Nuts (#3)
1. Screw
2. Cover
Silicon Rubber Sealant
for exterior use
Electrical tape
3. Cap Nut
4. Back Plate
5.Light Bulb
6.Glass Shade
7. Fixture Frame
Wire strippers
Wire cutters
Page 5