Publicidad
Section 4
Install Vehicle-Equipped Mushroom Knobs; Install Flanged Screws
Step 1
Step 1
Install the vehicle-equipped mushroom knobs
originally supplied with the vehicle hardtop panels,
and removed in Section 1, up through the bottom of
the sound bar in the locations shown.
Do not tighten the vehicle-equipped mushroom
knobs at this time.
P7 - 52450 Rev. E 0416
Hardware
Vehicle-Equipped
Mushroom Knob
Qty. 2
Installation Instructions - Sunrider for Hardtop
Step 2
Flanged Screw
M6 x 20mm
Part # 514.48
Qty. 2
4mm
Allen Wrench
Step 2
Using the 4mm Allen wrench, install a
M6 x 20mm Flanged Screw #514.48 through
the left door rail and into the metal bracket with
the weld-nut, from the underneath side.
Make sure to tighten this screw firmly.
Repeat this process on the right side of the
vehicle.
Use caution when aligning the parts
to avoid cross-threading or stripping
Page 7
514.48
NOTICE
screws during installation.
© 2016 Bestop, Inc.
Publicidad
