TECshow Quatrobeam Move Manual De Usuario página 12

shows "Clear Y/N?" , the data
are cleared. Press "MODE" but-
ton back to the menu.
•
T-Rast: Sameas pan coding set-
ting. When choose "About", press "SET-
UP" button enter to refer the product
information (includes item number, ver-
sion number, motor driver and LED driver
information) through "UP" and "DOWN"
button.
E. Factory Restoration
1. In the setting menu, you may refer to the
detail operation
2. Press "MODE" and "SETUP" button in
the same time for a while, power on the fixture,
LCD shows "Factory Reset...". Then release the
buttons and recover the factory setting.
P. 13
QUATROBEAM MOVE
ENGLISH VERSION