Fitting Instructions - avdel Infalok AV 10 Instrucciones

3/8" Avdelok ® Nose Assembly 73411-03100 and 73430-03100 for Avlock
T10 and Avdel ® AV™10
Be sure the power supply is turned off before fitting or removing the nose assembly.
3/8" AVDELOK NOSE ASSEMBLY
part No. 73411-03100
ITEM DESCRIPTION
1
ANVIL
2 COLLET
3 JAW SET
4 FOLLOWER
5 'O' RING
6 SLEEVE
7 COLLET LOCK

Fitting Instructions

Item numbers in bold refer to nose assembly components in the table and illustration above.
 Ensure the installation tool piston is in the fully forward position.

Lightly coat Jaw Set 3 with Moly Lithium grease.

On a flat work surface, assemble Sleeve 6, 'O' Rings 5, Follower 4 and Jaw Set 3 by stacking vertically in that order.

Carefully lower Collet 2 over the assembled components, slide to the edge of the work surface and with a finger,
push the assembled components fully inside the collet.
2
I M P O R TA N T
PART No QTY
73411-03101 1
73411-03102 1
73411-03103 1
73411-03104 1
73411-03105 10
73411-03106 1
73411-03107 1
3/8" AVDELOK NOSE ASSEMBLY
part No. 73430-03100
ITEM DESCRIPTION
1
ANVIL
2 COLLET
3 JAW SET
4 FOLLOWER
5 'O' RING
6 SLEEVE
7 COLLET LOCK
PART No QTY
73430-03101 1
73430-03102 1
73430-03103 1
73430-03104 1
07003-00426 10
73430-03105 1
73430-05004 1