Bissell CROSSWAVE CORDLESS MAX 2590 Serie Manual Del Usuario página 10

After Cleaning Care
(continued)
7.
Remove the top of the
tank by grabbing the sides of
the filter and pulling up. Pull
strainer tab up and out of
the tank to separate hair and
debris from dirty water. Throw
debris into the trash.
10.
Wash filter and screen
with warm water and mild
detergent. Rinse the bottom of
the tank cover.
13.
Replace the Brush Roll
Window by lining up tabs on
the edges of the foot. Press
the window back so it "clicks"
into place.
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
WARNING
electrical outlet before performing maintenance or troubleshooting on the dock.
10 BISSELL.com
8.
Pour dirty water into the
sink and rinse the tank.
11.
Leave all parts out to dry
before reassembling.
14.
Reassemble the Dirty
Water Tank. Angle tank back
into the body of the machine.
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
9.
Remove filter from the top
of the tank by pulling it up.
12.
Place the end of the brush
into the right side of the foot.
Press the tab of the brush
down so it locks into place.
15.
Insert the bottom of the
tank first. Pivot the top toward
the machine until it "clicks"
into place.