Dyna-Glo DGB610SSP Manual Del Usuario página 18

ASSEMBLY INSTRUCTIONS
22. Open the left door assembly (P) and the right
22
door assembly (Z), insert the hose/regulator
assembly into the cart assembly through the
clearance above the cart right side panel
assembly (A1). Place LP gas cylinder (sold
separately) into the nesting hole located in the
cart bottom shelf (U). Rotate the LP gas
cylinder until the hose/regulator coupling aligns
with the threaded valve of the cylinder. Hand-
P
A1
tighten the hose/regulator coupling to the
threaded valve of the LP gas cylinder.
U
Z
Tighten the tank screw clockwise in the
rear of the cart until the LP gas cylinder is
secured in place inside the nesting hole of the
cart bottom shelf (U).
Tank Screw
Front View
Tank Screw
LP Gas Cylinder
Rear View
18