Better Homes and Gardens BH44-084-399-09 Manual De Instrucciones página 5

Lock Washer
(4 used in this step)
③
Flat Washer
(4 used in this step)
④
M8 Hex Nut
(4 used in this step)
⑤
5. Flip last assembly upside down on a support surface. As shown.
NOTE: Place a protective cover (like the bubble wrap packing material) over the carton or other support
surface to prevent from scratching.
6. Remove the plastic caps from the hanger bolts of Chair Front Legs (C). Attach 2 Front Legs (C) to the
front corner blocks of the Seat Frame (B) by inserting the pre-attached hanger bolts through the drilled
holes on corner blocks, and fit the Flat Washer (4), Lock Washer (3) and M8 Hex Nut (5) onto each
hanger bolt. Tighten the Hex Nuts with the provided Open Wrench.
NOTE: DO NOT fully tighten all the nuts until the chair has been adjust and level all the legs so that
they do not wobble. Once adjusted then go back and tighten while making sure that the unit remains level.
7. Stand the assembled chair upright on a flat surface. Press down the Seat (B) to even all legs. Now,
tightly fasten all bolts and nuts with the provided Allen Wrench and Open Wrench.
8. Repeat the same process to assemble the other chair.
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing
Assembly Instructions
C
C
B
1-866-942-5362
A
5
Page 5
Stock # BH44-084-399-09
C
4
3
B
Factory No. 15197
C