Telefunken TF 652 COSI COMBO Instrucciones De Uso página 16

DELETE ALL
MEMO
Answering Machine Settings
TAM ON/OFF
SET OGM
listen to OGM (outgoing message) – Record your outgoing
message – Delete the OGM (set OGM to default)
Press OGM key on the base to switch between 2
announcements.
You can register your announcement with the possibility to
leave a message: set OGM1 by default, long press OGM key,
record your announcement and press
record an announcement without the possibility to leave a
message, do same procedure, but set the OGM2 by default
before recording.
TAM ALERT
SET RING
To set the number of rings before answering machine
(between 2 and 9 rings, or TOLL SAVER). By default, the
answering machine is activated after 5 rings. TOLL SAVER
option helps to save call and energy time. It waits for 5 rings
during the first call. If you have at least 1 new message on the
machine, it will activate TAM after 2 rings.
TAM VOICE
TAM PIN
TAM DEFAULT
REMOTE CONTROL
If you are away from home, TAM can be accessed by remote
16
Press MENU to enter, the display will show
CONFIRM?, you can press MENU to
confirm. Or long press DEL key for same
result
This allows users to record memo of up to 120
seconds.
(press and hold
(choose between announcement 1 or 2). Then, you
activate message alert (to hear warning tone every
60 sec, if you have new messages)
choose the TAM language
The 4-digit PIN is used to access the remote control.
The default code is "0000".
You will restore the following settings after you select
this command: Ring setting: 5; TAM ON; OGM 1;
Security code: 0000; TAM alarm: OFF
to switch TAM ON/OFF)
to end recording. To