Publicidad
Idiomas disponibles
Idiomas disponibles
Step 7 - Attaching the Top assembly to the Bottom assembly.
• Carefully place the top assembly onto the bottom assembly. NOTE: Be sure to align the cambolts (H4) with
the holes in bottom side panels (C).
• Insert snap cams (H5) into the holes in the bottom side panels (C). NOTE: If necessary, lightly tap the
snap cams with a hammer.
• Apply screw caps (H17) to screws (H2) on exterior of unit.
H 5
x 5
x 17
H 17
RECOMMEND
top assembly
bottom assembly
Pg 9 of 28
H 5
C-L
C-R
H 17
H 5
1-800-892-3986
IS8444
Publicidad
