Before You Begin - Kohler K-10666 Manual De Instalación

Important Information (cont.)
• Consult the dealer or an experienced radio/television technician
for help.
Modifications: Any modifications made to this device that are not
approved by Kohler Co. may void the authority granted to the user by
the FCC to operate this equipment.
This Class B digital apparatus complies with Canadian ICES-003.

Before You Begin

IMPORTANT! The tape covering the sensor eyes must remain in
place when the valve is not installed.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
For K-10673 and K-10674 New Installation Only
This atmospheric vacuum breaker shall not be subjected to a
continuous pressure for more than 12 hours.
The device shall be installed in accordance with the requirements
of the local plumbing code.
The device shall not be installed where the venting of water from
the device, during normal functioning, causes damage.
The device shall be installed downstream of the last valve.
For K-10666 and K-10677 Retrofit Installation Only
Remove the existing flush valve according to the manufacturer's
instructions.
Correctly position the existing stop valve and vacuum breaker
prior to installing the new exposed electronic valve.
Kohler Co. 3 1108709-2-D