Publicidad
Idiomas disponibles
Idiomas disponibles
Only use genuine replacement parts or accessories which have been expressly
recommended by the manufacturer.
If your pram has an additional deceleration break, this should always be
adjusted so that the breaking wheel does not obstruct.
If your pram is fitted with air tyres, regularly check the air pressure! (NOTE:
lightly press with thumb). The maximum recommended air pressure is shown on
the tyre. NOTE: air tyres can cause non-removable marks on laminate, parquet or
plastic floors!
Care and maintenance of the pram:
For the textile parts intended by the manufacturer to be removable and washable,
please read the attached care label. Never use sharp or abrasive cleaning products,
instead use a mild soap solution or a special textile cleaning product.
The plastic parts and the frame can also be cleaned with a soap solution.
After using the pram in rain or wet conditions, always clean and dry the frame. If the
fabric cover is soaked, allow the pram to dry in its assembled state.
The wheels should regularly be detached and the axles as well as all moving
connections and the suspension should be treated with an acid-free oil (sewing
machine oil, WD-40 or fat-free lubricant). This helps the pram run more smoothly
and quietly and limits the amount of early signs of wear.
Care for your pram and ensure that no flash rust occurs, as this does not constitute a
reason for reclamation.
ATTENTION: The fabrics used are often cotton or blended cotton fabrics which comply
with the current legal requirements.
Heavy wear over a prolonged period (e.g. intensive exposure to sunlight) can cause
colours to fade, particularly in natural textiles; however, this does not constitute a
reason for reclamation.
In compliance with EN 1888 / 2012
GB
Publicidad
