Torin BIG RED JACKS TR4055 El Manual Del Propietario página 13

ADDITIONAL WARNINGS:
• DO NOT USE MOTOR OIL IN THE JACK.
• ONLY USE ANTI-FOAMING JACK OIL.
• ALWAYS USE A GOOD GRADE HYDRAULIC JACK OIL.
• DO NOT USE HYDRAULIC BRAKE FLUID, ALCOHOL, GLYCERINE, DETERGENT, MOTOR OIL OR
DIRTY OIL.
• USE OF A NON-RECOMMENDED FLUID CAN CAUSE DAMAGE TO A JACK.
• AVOID MIXING DIFFERENT TYPES OF FLUID AND NEVER USE BRAKE FLUID, TURBINE OIL,
TRANSMISSION FLUID, MOTOR OIL OR GLYCERIN. IMPROPER FLUID CAN CAUSE PREMATURE
FAILURE OF THE JACK AND THE POTENTIAL FOR SUDDEN AND IMMEDIATE LOSS OF LOAD.
• DISPOSE OF HYDRAULIC FLUID IN ACCORDANCE WITH LOCAL REGULATIONS.
Important: Use only a quality grade hydraulic jack oil. Avoid mixing different types of fluid and NEVER use
brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause failure of the jack and
the potential for sudden and immediate loss of load.
LUBRICATION
A periodic coating of light lubricating oil to pivot will help to ensure that pump piston linkages move freely.
Note: Never apply oil to the saddle. If saddle extension threads require lubrication; clean thread surfaces
with a clean, dry cloth, then apply a drop of bearing grease. Distribute as evenly as possible along the
threaded post.
1. Add a coating of light lubricating oil to pivot points. Axles and hinges will help to prevent rust and assure
that wheels, casters and pump assemblies move freely.
2. Periodically check the pump piston and ram for signs of rust or corrosion. Clean as needed and wipe with
an oil cloth.
3. When not in use, store the Jack with pump piston and ram fully retracted .
13